The Project:
(You may click on a picture to view a larger version)
The first thing I had to do was locate a
toaster. I really wanted a 2-slot toaster, but found that everything I wanted to
add to this system would not fit. So I purchased a GE 4-slot chrome toaster.
The
next step was to remove the base.
With the base off of the toaster I then had to remove the toasting heater box.
Here
you can see the left over toaster guts. I had to save the flat piece in the
front. This is what holds the top of the toaster together and connects the base
to the whole assembly.
